Hello,
I am trying to get our 5-axis NX8 post built for our DMG DMU200P MILLPLUS
V410 Controller V420-V500 Extension; however, when I get to the line M56 command the controller/machine just stops reading the NC code and does nothing (well what I see as nothing).
Can someone with more experience please look at this code (below) and offer some advice as to what I am coding wrong.
I am first starting out with trying to get a correct posted file for a simple 45 degree mill cut on a sample block.
My Code from NX8 Post:
N0000 ()
N5 G54 I1
N6 G93 X0.0 Y0.0 Z0.0
N7 G0
N8 G90
N9 G40
N10 G94 F5=1
N11 (OPER: MILL_ANGLE_FACE)
N12 G174
N13 G7
N14 (TOOL:243 1.0_FLAT_EM )
N15 M56
N16 T243 M6
N17 G93 X.375 Y1.5 Z-.375
N18 G7 A5=45. B5=0.0 C5=270. L1=1
N19 M57
N20 S9000 M3
N21 M8
N22 G0 X1.3333 Y1.5303
N23 Z.6
N24 Z.1
N25 G1 Z0.0 F10.
N26 Y1.0303
N27 Y-1.0303
N28 X.6667
N29 Y1.0303
N30 X0.0
N31 Y-1.0303
N32 X-.6667
N33 Y1.0303
N34 X-1.3333
N35 Y-1.0303
N36 Y-1.5303
N37 Z.1
N38 G0 Z.6
N39 G93 X0.0 Y0.0 Z0.0
N40 M5
N41 M9
N42 G7
N43 G174
N44 G7 A5=0.0 C5=0.0 L1=1
N45 M30
%
Thanks,