Hi All,
I have an 80's Okuma Howa Act3 with the fanuc 3tf controller. The manual says it can do macro programming but when I try an input the program it alarms out when it reads the # sign, nor does the # symbol work when writing on the controller. I'm assuming it's a parameter issue, but?? Any advice would be greatly appreciated. Thanks for you time.
Thread: Fanuc 3tf & Macro Programming
Results 1 to 4 of 4
-
02-15-2013, 06:53 AM #1
Neuer Benutzer
- Join Date
- Feb 2013
- Posts
- 5
Fanuc 3tf & Macro Programming
-
02-15-2013, 09:41 AM #2
Gold Member
- Join Date
- Aug 2011
- Posts
- 2517
your machine does not have the Macro A/B Option
-
02-15-2013, 04:55 PM #3
Neuer Benutzer
- Join Date
- Feb 2013
- Posts
- 5
Thanks, any idea on how to get that option?
-
02-15-2013, 05:02 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
The option list I have does not show Macro option capability, as already mentioned.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Macro Programming on Fanuc Oi Mate TB
By deetech in forum FanucReplies: 1Last Post: 07-30-2012, 02:14 PM -
Fanuc Macro-a Programming Manual
By CHANDRU in forum FanucReplies: 4Last Post: 03-20-2011, 05:00 PM -
info required about fanuc macro programming
By sinha_nsit in forum FanucReplies: 11Last Post: 04-07-2007, 03:13 AM -
Fanuc Macro and G-Code Programming
By kilogulf59 in forum FanucReplies: 3Last Post: 11-01-2006, 06:02 PM
Posting Permissions
