[dancro316]

I had a air pressure alarm code 1002 . i fixed the air issue but when it alarmed out its in between tool changes and now im getting a 1004 code as well as a 1012 code how do i reset the limit switch (LS) parameter to reset switch...or where can i download a fanuc om parameter and diagnostic manual.

[yours_prabhat]

Sir the 1XXX alarms are user alarms , This is designed or written by MTB ( Machine Tool builder ) and it varies machine to machine . For manual send me your e mail id i will send you the manual . you can check the reference limit switches . For your Existing problems.or you can try with Although parameter No. 1012#0 (IDGx) was set to 1 to inhibit
the reference position from being set again for a return to the
reference position without a dog, an attempt was made to
perform a manual return to the reference position.
regards
Prabhat Mishra
[email protected]