[Rea]

I being looking for Dynapath Delta CNC Post Processor for Republic Lagun 3516 and I'm having problems to work with and if wondering if someone can help.... Thanks!

[KevinV_MEI]

Here's an old one off an old cd, have no idea if it works or any knowledge of dynapath controllers.

In the future, please post which version you have/are working with. Also what you have that works and what doesn't.

Good luck.

Edit, well the uploads failed. I'll try one more time.

[KevinV_MEI]

try this

[Rea]

Thanks Kevin I'm using Mastercam X6 in this machine and the post is good but I made some changes to work with. Thanks again for this help!