Hello !
I need to send clock signal (in this case at least two clock signals) from a PIC to L297 stepper motor driver. In other words, I need to control at least two motors at a time.
Now, with one motor driven at a time there is no problem, but I will need more than that. Clock send to L297, as you know, determines speed of the stepper, e.g. number of steps in time. Problem is that I would need more than one clock signal from the PIC, different frequencies, of course.
Currently, I am using 16F877 but I am not sure that I can do it with this controller. Any recommendation would be helpful.
Thank you,
Josip