I accepted a quote. Closed.
I need 210pcs of each. I will accept any 2000, 6000, or 7000 series aluminum, please let me know which material you are quoting, most likely you will use 6061T-6.
If the surface finish or edge breaks are going to vary from the print please notify me first so I can approve it in writing. I also need these ASAP so please include a lead time, I would like these shipped USPS Priority Flat Rate.
Results 1 to 3 of 3
-
02-26-2013, 07:06 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 48
RFQ: Simple Aluminum Parts (CLOSED)
-
02-27-2013, 03:35 AM #2
Registered
- Join Date
- Oct 2010
- Posts
- 103
Hey, your private message inbox is full
just wanted to let you know
-
03-05-2013, 11:16 PM #3wheelieking71 Guest
Tried to answer your PM. But, your box is full. You can email me @ [email protected]
Similar Threads
-
RFQ: simple aluminum parts
By mcarvey in forum RFQ (Request for Quote)Replies: 1Last Post: 10-21-2011, 08:59 PM -
Parts fitting clearances in acrylic and aluminum parts?
By jbarber in forum Material Machining SolutionsReplies: 0Last Post: 11-12-2010, 04:52 AM -
RFQ for Simple aluminum Job
By fastolds in forum Employment OpportunityReplies: 5Last Post: 09-21-2010, 02:58 PM -
RFQQuote for few simple parts (Aluminum)
By rschwarz in forum Employment OpportunityReplies: 1Last Post: 05-27-2010, 03:24 AM -
RFQ: simple parts needed to be built out of aluminum
By 50062040 in forum Employment OpportunityReplies: 0Last Post: 06-06-2006, 11:47 PM
Posting Permissions
