[BW4706]

Does anyone have a sample program for a Fadal VH65 Rotary axis ?
We just bought a Fadal VMC15-XT with a Fadal VH65 Rotary axis.
I am looking for a program to drill 8 holes on a 2 inch cylinder spaced 45 degs. apart.
I would like to know how to manually write the program for now until I learn to program it with Master Cam V9.
All help is greatly appreciated. Thank You.

[txcncman]

You should always learn to program manually before using CAM.

Format 1 or Format 2?

All I have is Format 1. If I find one with A axis, I will post it for you.

[BW4706]

Fadal Format 1 is what we use. Thanks

[DareBee]

Feel free to wade through this one

%
O9 (EXTRUDER SCREW)
G0 G40 G49 G80 G90 G17
(X ZERO AT ROTARY CHUCK- CRITICAL TO SET THREADMILL DIA)
T4 M6
(SCREW ROUGHING 1 - .5IN 4FL RUFFER)
G0 G90 G58 X-11.89 Y-.22 A0
Z8.5 H4
S1150 M3 M8
Z8.045 F8.
G1 G91 X3. A-1080. F260.
X3. A-1080. F260.
X3. A-1080. F260.
X1.9722 A-710. F260.
Z1. F12.
(SCREW ROUGHING 2 - .5IN 4FL BALLMILL)
T8 M6
G0 G90 X-11.87 Y0 A0
Z8.045 H8
S1240 M3 M8
G1 G91 X0.05 F8.
X3. A-1080. F360.
X3. A-1080. F360.
X3. A-1080. F360.
X1.9722 A-710. F360.
X-0.1 F8.
X-1.9722 A710. F360.
X-3. A1080. F360.
X-3. A1080. F360.
X-3. A1080. F360.
G90 X-11.87 Y0 A0
Z7.945
(SCREW ROUGHING 3)
G91 X0.05 F8.
X3. A-1080. F350.
X3. A-1080. F350.
X3. A-1080. F350.
X1.9722 A-710. F350.
X-0.1 F5.
X-1.9722 A710. F370.
X-3. A1080. F370.
X-3. A1080. F370.
X-3. A1080. F370.
T9 M6
G0 G90 X-11.87 Y0 A0 (SCREW FINISH 1 - .625 4FL BALLMILL)
S1100 M3 M8
Z7.932 H9
G1 G91 X0.007 F10.
X3. A-1080. F410.
X3. A-1080. F410.
X3. A-1080. F410.
X1.9722 A-710. F410.
X-0.014 F5.
X-1.9722 A710. F410.
X-3. A1080. F410.
X-3. A1080. F410.
X-3. A1080. F410.
G0 G90 X-11.87 Y0 A0
Z7.925
(SCREW FINISH 2)
G1 G91 X0.012 F10.
X3. A-1080. F390.
X3. A-1080. F390.
X3. A-1080. F390.
X1.9722 A-710. F390.
X-0.024 F4.
X-1.9722 A710. F390.
X-3. A1080. F390.
X-3. A1080. F390.
X-3. A1080. F390.
G80
G0 G90 Z9.
(ROTATE TABLE)
A-115. F1250.
(NOSE FLAT - 3/4 HI POS)
T7 M6
G0 X-11.4471 Y1.6064 S2000 M3
Z8.345 H7
M8
G1 Z8.2118 F88.
X-11.641 Y-1.4937 F14.
Z8.1836
X-11.4471 Y1.6064
Z8.1555
X-11.641 Y-1.4937
Z8.1273
X-11.4471 Y1.6064
Z8.0991
X-11.641 Y-1.4937
Z8.0709
X-11.4471 Y1.6064
Z8.0427
X-11.641 Y-1.4937
Z8.0145
X-11.4471 Y1.6064
Z7.9864
X-11.641 Y-1.4937
Z7.9582
X-11.4471 Y1.6064
Z7.93
X-11.641 Y-1.4937
G0 Z8.4
(ROTATE TABLE)
A-175. F1250.
(DROP FLAT - 3/4 HI POS)
X-1.9169 Y-2.0211
G1 Z8.2118 F88.
X-1.6213 Y1.0039 F14.
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
Z8.1836
X-1.8954 Y1.0135
X-1.6213 Y1.0039
X-1.9169 Y-2.0211
Z8.1555
X-1.6213 Y1.0039
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
Z8.1273
X-1.8954 Y1.0135
X-1.6213 Y1.0039
X-1.9169 Y-2.0211
Z8.0991
X-1.6213 Y1.0039
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
Z8.0709
X-1.8954 Y1.0135
X-1.6213 Y1.0039
X-1.9169 Y-2.0211
Z8.0427
X-1.6213 Y1.0039
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
Z8.0145
X-1.8954 Y1.0135
X-1.6213 Y1.0039
X-1.9169 Y-2.0211
Z7.9864
X-1.6213 Y1.0039
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
Z7.9582
X-1.8954 Y1.0135
X-1.6213 Y1.0039
X-1.9169 Y-2.0211
Z7.93
X-1.6213 Y1.0039
X-1.8954 Y1.0135
X-2.1856 Y-2.0258
G0 Z9.
(ROTATE TABLE0)
A-168. F1250.
(CENTER DRILL #5)
G90
T10 M6
X-0.87 Y0 S900 M3
Z9.5 H10
M8
G70 S800 M3
G73 R+8.3 Q0.03 X-0.87 Y0 Z7.72 F3.
G80
G0 Z9.5
(ROTATE TABLE)
G91
A180. F1250.
G90
(CENTER DRILL AGAIN)
M8
G70 S800 M3
G73 R+8.3 Q0.03 X-0.87 Y0 Z7.72 F3.
G80
G0 Z9.9
(M12 DRILL FOR M14-2 )
G90
M9
T12 M6
X-0.87 Y0
Z9.5 H12
M8
G70 S460 M3
G73 R+8.3 Q0.06 X-0.87 Y0 Z6.97 F4.
G80
G0 Z9.5
(ROTATE TABLE)
G91
A180. F1250.
G90
M8
G70 S460 M3 (M12 DRILL WILL BE INTERPOLATED TO 14MM)
G73 R+8.3 Q0.06 X-0.87 Y0 Z6.97 F4.
G80
G0 Z9.5
(ROTATE TABLE)
G91
A180. F1250.
G90
(CHAMFER FOR TAP - CHAMFER CUTTER)
G90
M9
T14 M6 (CHAMFER CUTTER)
X-0.9633 Y0.0594 S800 M3
Z9.5 H14
M8
Z8.2 F44.
G1 Z8.13 F2.5 (CHAMFER TOOL DEPTH)
G3 X-1.018 Y0.0146 I-0.0049 J-0.0497 F3.
X-0.722 Y-0.0146 I0.148 J-0.0146
X-1.018 Y0.0146 I-0.148 J0.0146
X-0.9731 Y-0.0401 I0.0498 J-0.0049 F3.
G0 Z9.8 (THREAD MILLING)
G40 G80 G17 (Tool TABLE DIA = 0.389 inch)
G90
T13 M06 (Thread mill cutter CARMEX MT1010C272.0)
X-.87 Y0 (THREAD CENTER COORDINATE)
H13 Z9.8 M8(Z TO R PLANE H= T NO)
G43 Z8.25 F44. M3 S3000.(Z TO THREAD TOP)
G91 G00 X0 Y0 Z-0.85 (Z = THREAD DEPTH)
G01 G41 D13 X0.0452 Y-0.2264 Z0 F1.53 (D = T NO)
G91 G03 X0.2264 Y0.2264 Z0.0076 R0.2264 F1.53
G91 G03 X0 Y0 Z0.0787 I-0.2716 J0 F4.2
G91 G03 X-0.2264 Y0.2264 Z0.0076 R0.2264
G01 G40 X-0.0452 Y-0.2264 Z0 F22.
G91 X0 Y0 Z-0.0929
G01 G41 D13 X0.0526 Y-0.2258 Z0 F1.62 (D=T NO)
G91 G03 X0.2258 Y0.2258 Z0.0067 R0.2258 F1.62
G91 G03 X0 Y0 Z0.0787 I-0.2784 J0 F5.40
G91 G03 X-0.2258 Y0.2258 Z0.0067 R0.2258
G01 G40 X-0.0526 Y-0.2258 Z0 F44.
G90 G01 Z9.8 F66.(Z MUST BE R PLANE)
G80
M5 M9
(ROTATE TABLE)
G91
A180. F1250.
G90
(CBORE MILL - 1/4 CUTTER 4FL)
M9
T2 M6
G0 X-0.8687 Y0.0104 S4400 M3
Z9.5 H2
M8
G1 Z7.92 F44.
X-0.9225 Y0.0655 F14.
G3 X-0.9881 Y0.0116 I-0.0059 J-0.0597 F14.
X-0.7519 Y-0.0116 I0.1181 J-0.0116 F14.
X-0.9881 Y0.0116 I-0.1181 J0.0116 F14.
G2 X-0.995 Y0.0123 I-0.0035 J0.0004 F14.
G3 X-1.0019 Y0.013 I-0.0035 J0.0004 F14.
X-0.7381 Y-0.013 I0.1319 J-0.013 F14.
X-1.0019 Y0.013 I-0.1319 J0.013 F14.
G2 X-1.0088 Y0.0137 I-0.0035 J0.0003 F14.
G3 X-1.0157 Y0.0144 I-0.0034 J0.0003 F14.
X-0.7243 Y-0.0143 I0.1457 J-0.0144 F14.
X-1.0157 Y0.0144 I-0.1457 J0.0143 F14.
G2 X-1.0226 Y0.015 I-0.0034 J0.0003 F14.
G3 X-1.0295 Y0.0157 I-0.0034 J0.0004 F14.
X-0.7105 Y-0.0157 I0.1595 J-0.0157 F14.
X-1.0295 Y0.0157 I-0.1595 J0.0157 F14.
G2 X-1.0364 Y0.0164 I-0.0034 J0.0003 F14.
G3 X-1.0433 Y0.0171 I-0.0034 J0.0003 F14.
X-0.6968 Y-0.0171 I0.1733 J-0.0171 F14.
X-1.0433 Y0.0171 I-0.1732 J0.0171 F14.
G2 X-1.0501 Y0.0177 I-0.0034 J0.0003 F14.
G3 X-1.057 Y0.0184 I-0.0035 J0.0004 F14.
X-0.683 Y-0.0184 I0.187 J-0.0184 F14.
X-1.057 Y0.0184 I-0.187 J0.0184 F14.
G2 X-1.0639 Y0.0191 I-0.0035 J0.0004 F14.
G3 X-1.0708 Y0.0198 I-0.0035 J0.0003 F14.
X-0.6692 Y-0.0198 I0.2008 J-0.0198 F14.
X-1.0708 Y0.0198 I-0.2008 J0.0198 F14.
G2 X-1.0777 Y0.0205 I-0.0035 J0.0003 F14.
G3 X-1.0846 Y0.0211 I-0.0034 J0.0003 F14.
X-0.6554 Y-0.0211 I0.2146 J-0.0211 F14.
X-1.0846 Y0.0211 I-0.2146 J0.0211 F14.
G2 X-1.0915 Y0.0218 I-0.0034 J0.0004 F14.
G3 X-1.0984 Y0.0225 I-0.0034 J0.0004 F14.
X-0.6416 Y-0.0225 I0.2284 J-0.0225 F14.
X-1.0984 Y0.0225 I-0.2284 J0.0225 F14.
G2 X-1.1053 Y0.0232 I-0.0034 J0.0003 F14.
G3 X-1.1121 Y0.0239 I-0.0034 J0.0003 F14.
X-0.6279 Y-0.0238 I0.2421 J-0.0239 F14.
X-1.1121 Y0.0239 I-0.2421 J0.0238 F14.
G2 X-1.119 Y0.0245 I-0.0035 J0.0003 F14.
G3 X-1.1259 Y0.0252 I-0.0035 J0.0004 F14.
X-0.6141 Y-0.0252 I0.2559 J-0.0252 F14.
X-1.1259 Y0.0252 I-0.2559 J0.0252 F14.
G2 X-1.1328 Y0.0259 I-0.0035 J0.0003 F14.
G3 X-1.1397 Y0.0266 I-0.0035 J0.0003 F14.
X-0.6003 Y-0.0266 I0.2697 J-0.0266 F14.
X-1.1397 Y0.0266 I-0.2697 J0.0266 F14.
G2 X-1.1466 Y0.0272 I-0.0035 J0.0003 F14.
G3 X-1.1535 Y0.0279 I-0.0034 J0.0004 F14.
X-0.5865 Y-0.0279 I0.2835 J-0.0279 F14.
X-1.1535 Y0.0279 I-0.2835 J0.0279 F14.
G2 X-1.1604 Y0.0286 I-0.0034 J0.0004 F14.
G3 X-1.1673 Y0.0293 I-0.0034 J0.0003 F14.
X-0.5727 Y-0.0293 I0.2973 J-0.0293 F14.
X-1.1673 Y0.0293 I-0.2973 J0.0293 F14.
X-1.1134 Y-0.0363 I0.0597 J-0.0059 F14.
G0 Z9.45
X-0.8687 Y0.0104
G1 Z7.65 F44. (CBORE DEPTH)
X-0.9225 Y0.0655 F14.
G3 X-0.9881 Y0.0116 I-0.0059 J-0.0597 F14.
X-0.7519 Y-0.0116 I0.1181 J-0.0116 F14.
X-0.9881 Y0.0116 I-0.1181 J0.0116 F14.
G2 X-0.995 Y0.0123 I-0.0035 J0.0004 F14.
G3 X-1.0019 Y0.013 I-0.0035 J0.0004 F14.
X-0.7381 Y-0.013 I0.1319 J-0.013 F14.
X-1.0019 Y0.013 I-0.1319 J0.013 F14.
G2 X-1.0088 Y0.0137 I-0.0035 J0.0003 F14.
G3 X-1.0157 Y0.0144 I-0.0034 J0.0003 F14.
X-0.7243 Y-0.0143 I0.1457 J-0.0144 F14.
X-1.0157 Y0.0144 I-0.1457 J0.0143 F14.
G2 X-1.0226 Y0.015 I-0.0034 J0.0003 F14.
G3 X-1.0295 Y0.0157 I-0.0034 J0.0004 F14.
X-0.7105 Y-0.0157 I0.1595 J-0.0157 F14.
X-1.0295 Y0.0157 I-0.1595 J0.0157 F14.
G2 X-1.0364 Y0.0164 I-0.0034 J0.0003 F14.
G3 X-1.0433 Y0.0171 I-0.0034 J0.0003 F14.
X-0.6968 Y-0.0171 I0.1733 J-0.0171 F14.
X-1.0433 Y0.0171 I-0.1732 J0.0171 F14.
G2 X-1.0501 Y0.0177 I-0.0034 J0.0003 F14.
G3 X-1.057 Y0.0184 I-0.0035 J0.0004 F14.
X-0.683 Y-0.0184 I0.187 J-0.0184 F14.
X-1.057 Y0.0184 I-0.187 J0.0184 F14.
G2 X-1.0639 Y0.0191 I-0.0035 J0.0004 F14.
G3 X-1.0708 Y0.0198 I-0.0035 J0.0003 F14.
X-0.6692 Y-0.0198 I0.2008 J-0.0198 F14.
X-1.0708 Y0.0198 I-0.2008 J0.0198 F14.
G2 X-1.0777 Y0.0205 I-0.0035 J0.0003 F14.
G3 X-1.0846 Y0.0211 I-0.0034 J0.0003 F14.
X-0.6554 Y-0.0211 I0.2146 J-0.0211 F14.
X-1.0846 Y0.0211 I-0.2146 J0.0211 F14.
G2 X-1.0915 Y0.0218 I-0.0034 J0.0004 F14.
G3 X-1.0984 Y0.0225 I-0.0034 J0.0004 F14.
X-0.6416 Y-0.0225 I0.2284 J-0.0225 F14.
X-1.0984 Y0.0225 I-0.2284 J0.0225 F14.
G2 X-1.1053 Y0.0232 I-0.0034 J0.0003 F14.
G3 X-1.1121 Y0.0239 I-0.0034 J0.0003 F14.
X-0.6279 Y-0.0238 I0.2421 J-0.0239 F14.
X-1.1121 Y0.0239 I-0.2421 J0.0238 F14.
G2 X-1.119 Y0.0245 I-0.0035 J0.0003 F14.
G3 X-1.1259 Y0.0252 I-0.0035 J0.0004 F14.
X-0.6141 Y-0.0252 I0.2559 J-0.0252 F14.
X-1.1259 Y0.0252 I-0.2559 J0.0252 F14.
G2 X-1.1328 Y0.0259 I-0.0035 J0.0003 F14.
G3 X-1.1397 Y0.0266 I-0.0035 J0.0003 F14.
X-0.6003 Y-0.0266 I0.2697 J-0.0266 F14.
X-1.1397 Y0.0266 I-0.2697 J0.0266 F14.
G2 X-1.1466 Y0.0272 I-0.0035 J0.0003 F14.
G3 X-1.1535 Y0.0279 I-0.0034 J0.0004 F14.
X-0.5865 Y-0.0279 I0.2835 J-0.0279 F14.
X-1.1535 Y0.0279 I-0.2835 J0.0279 F14.
G2 X-1.1604 Y0.0286 I-0.0034 J0.0004 F14.
G3 X-1.1673 Y0.0293 I-0.0034 J0.0003 F14.
X-0.5727 Y-0.0293 I0.2973 J-0.0293 F14.
X-1.1673 Y0.0293 I-0.2973 J0.0293 F14.
X-1.1134 Y-0.0363 I0.0597 J-0.0059 F14.
G0 Z9.5
(CBore final cut)
X-0.9294Y0.1044
G1Z7.648 F44.(CBORE DEPTH)
X-0.9785Y0.1916 F14.
G3X-1.1752Y0.0301I-0.0176J-0.1792 F14.
X-0.5648Y-0.0301I0.3052J-0.0301 F14.
X-1.1752Y0.0301I-0.3052J0.0301 F14.
X-1.0137Y-0.1667I0.1791J-0.0177 F14.
G0Z9.5
(HOLE MILL - 1/4 CUTTER)
X-0.8677 Y0.0103
G1 Z7.4543 F33.
X-0.9215 Y0.0654 F14.
G3 X-0.9871 Y0.0115 I-0.0059 J-0.0597 F14.
X-0.7529 Y-0.0115 I0.1171 J-0.0115 F14.
X-0.9871 Y0.0115 I-0.1171 J0.0115 F14.
G2 X-0.9915 Y0.012 I-0.0022 J0.0003 F14.
G3 X-0.9958 Y0.0124 I-0.0022 J0.0002 F14.
X-0.7442 Y-0.0124 I0.1258 J-0.0124 F14.
X-0.9958 Y0.0124 I-0.1258 J0.0124 F14.
G2 X-1.0002 Y0.0128 I-0.0022 J0.0002 F14.
G3 X-1.0046 Y0.0133 I-0.0022 J0.0002 F14.
X-0.7355 Y-0.0132 I0.1346 J-0.0133 F14.
X-1.0046 Y0.0133 I-0.1345 J0.0132 F14.
G2 X-1.0089 Y0.0137 I-0.0021 J0.0002 F14.
G3 X-1.0133 Y0.0141 I-0.0022 J0.0002 F14.
X-0.7267 Y-0.0141 I0.1433 J-0.0141 F14.
X-1.0133 Y0.0141 I-0.1433 J0.0141 F14.
G2 X-1.0176 Y0.0145 I-0.0021 J0.0002 F14.
G3 X-1.022 Y0.015 I-0.0022 J0.0003 F14.
X-0.718 Y-0.015 I0.152 J-0.015 F14.
X-1.022 Y0.015 I-0.152 J0.015 F14.
X-0.9681 Y-0.0506 I0.0597 J-0.0059 F14.
G0 Z9.5
(Hole Mill finish)
X-0.7856Y0.1023
G1Z7.4543 F77.
G3X-0.9685Y0.1213I-0.1009J-0.0819 F14.
X-0.7715Y-0.1213I0.0985J-0.1213 F14.
X-0.9685Y0.1213I-0.0985J0.1213 F14.
X-0.9875Y-0.0616I0.082J-0.1009 F14.
G0Z9.5
(NOSE RUN IN - 3/8 4FL END MILL)
T1 M6
G0 G90 G58 X-12.22 Y0 A-296.
Z7.932 H1
S3500 M3 M8
G1 G91 X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
X0.03 F11.
G1 G91 X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
X0.03 F11.
X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
X0.03 F11.
G1 G91 X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
X0.03 F11.
X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
X0.03 F11.
G1 G91 X0.5 A-180. F1000.
X0.03 F11.
X-0.5 A180. F1000.
G90 Z9. F66.
G80
M5 M9
G0 G90 H0 Z0
E0 X0 Y9.9 A0
M30
%

[DareBee]

This one is mostly drilling

%
N2 L200 (Part X0 is outer face of flange - CENTER DRILL #2 long 1.25 overhang)
N3 G91 A15.
N4 G90
N5 X-0.870 Y0.
N6 Z8.7 H12
N7 G73 R8.6 Q0.02 Z8.31 F5.
N8 X-1.27
N9 X-1.67
N10 X-2.07
N11 X-2.47
N12 X-2.87
N13 G91 G0 A15. L0
N14 G90
N15 X-3.
N16 X-2.62
N17 X-2.24
N18 X-1.87
N19 X-1.5
N20 X-1.12
N21 X-.74
N22 G91 G0 A15. L0
N23 G90
N24 X-.806
N25 X-1.23
N26 X-1.656
N27 X-2.085
N28 X-2.51
N29 X-2.935
N30 G91 G0 A15. L0
N31 G90
N32 X-3.
N33 X-2.62
N34 X-2.24
N35 X-1.87
N36 X-1.5
N37 X-1.12
N38 X-.74
N39 G91 G0 A15. L0
N40 G90
N41 X-.87
N42 X-1.27
N43 X-1.67
N44 X-2.07
N45 X-2.47
N46 X-2.87
N47 G80
N48 X-.87
N49 L400 (DRILLING #56 Drillbit with 1.3 Overhang)
N50 G91 A15.
N51 G90
N52 X-0.870 Y0.
N53 Z8.7 H13
N54 G73 R8.6 I.2 Q0.02 Z8.23 F5.6
N55 X-1.27
N56 X-1.67
N57 X-2.07
N58 X-2.47
N59 X-2.87
N60 G91 G0 A15. L0
N61 G90
N62 X-3.
N63 X-2.62
N64 X-2.24
N65 X-1.87
N66 X-1.5
N67 X-1.12
N68 X-.74
N69 G91 G0 A15. L0
N70 G90
N71 X-.806
N72 X-1.23
N73 X-1.656
N74 X-2.085
N75 X-2.51
N76 X-2.935
N77 G91 G0 A15. L0
N78 G90
N79 X-3.
N80 X-2.62
N81 X-2.24
N82 X-1.87
N83 X-1.5
N84 X-1.12
N85 X-.74
N86 G91 G0 A15. L0
N87 G90
N88 X-.87
N89 X-1.27
N90 X-1.67
N91 X-2.07
N92 X-2.47
N93 X-2.87
N94 G80
N95 X-.87
N96 M17
N97 M30
N98 G00 G40 G49 G80 G90 G17 G70 (MAIN PROGRAM)
N99 G9
N100 T12 M6 (Center Drill)
N101 G58 S2200. M3 M8
N102 A0.
N103 L201
N104 G0 A90.
N105 L201
N106 G0 A180.
N107 L201
N108 G0 A270.
N109 L201
N110 T13 M6 (Drill)
N111 G58 S7300. M3 M8
N112 Z10. H13
N113 A0.
N114 L401
N115 G0 A90.
N116 L401
N117 G0 A180.
N118 L401
N119 G0 A270.
N120 L401
N121 Z10.
N122 T8 M6 (GEAR CUTTER #4132 MOUNT on MANDREL CCW rotation solid toolholder)
N123 G58 S160. M4 M8
N124 A0. X-1.495 Y3. (SLOT 1)
N125 Z6.405 H8 (DATUM GEAR CUTTER TOOL HEIGHT TO BOTTOM FACE OF CUTTER)
N126 G01 Y2.69 F2.
N127 X-2.25 F3.
N128 Y2.8
N129 G0 Y3.
N130 X-1.495
N131 A90. (SLOT 2)
N132 G01 Y2.69 F2.
N133 X-2.25 F3.
N134 Y2.8
N135 G0 Y3.
N136 X-1.495
N137 A180. (SLOT 3)
N138 G01 Y2.69 F2.
N139 X-2.25 F3.
N140 Y2.8
N141 G0 Y3.
N142 X-1.495
N143 A270. (SLOT 4)
N144 G01 Y2.69 F2.
N145 X-2.25 F3.
N146 Y2.8
N147 G0 Y3.
N148 Z11.5
N149 T14 M6 (.5 x 4FLUTE CBIDE CHAMFER CUTTER 1.3 OVERHANG)
N150 G58 S1100. M3 M8
N151 A0. X-1.3 Y-.005 (BEVEL 1)
N152 Z8.6 H14
N153 G01 X-2.72 Z8.355 F4.5
N154 Y.005
N155 X-1.02
N156 Y-.005
N157 X-2.72
N158 Z8.6 F44.
N159 G0 X-1.3
N160 A90. (BEVEL 2)
N161 G01 X-2.72 Z8.355 F4.5
N162 Y.005
N163 X-1.02
N164 Y-.005
N165 X-2.72
N166 Z8.6 F44.
N167 G0 X-1.3
N168 A180. (BEVEL 3)
N169 G01 X-2.72 Z8.355 F4.5
N170 Y.005
N171 X-1.02
N172 Y-.005
N173 X-2.72
N174 Z8.6 F44.
N175 G0 X-1.3
N176 A270. (BEVEL 4)
N177 G01 X-2.72 Z8.355 F4.5
N178 Y.005
N179 X-1.02
N180 Y-.005
N181 X-2.72
N182 Z8.6 F44.
N183 G0 Z10.
N184 T8 M6 (GEAR CUTTER)
N185 G58 S160. M4 M8
N186 A0. X-1.495 Y3. (SLOT 1)
N187 Z6.405 H8
N188 G01 Y2.61 F2.
N189 X-2.25 F3.
N190 Y2.7
N191 G0 Y3.
N192 X-1.495
N193 A90. (SLOT 2)
N194 G01 Y2.61 F2.
N195 X-2.25 F3.
N196 Y2.7
N197 G0 Y3.
N198 X-1.495
N199 A180. (SLOT 3)
N200 G01 Y2.61 F2.
N201 X-2.25 F3.
N202 Y2.7
N203 G0 Y3.
N204 X-1.495
N205 A270. (SLOT 4)
N206 G01 Y2.61 F2.
N207 X-2.25 F3.
N208 Y2.7
N209 G0 Y3.
N210 Z11.5
N211 G80
N212 M05 M09
N213 G91 G28 Z0.0
N214 G00 G90 E0 X5.0 Y9.5 A0.0
N215 G8
N216 M19
N217 M30
%

[BW4706]

Thank You. A lot of great people on this site. Really appreciate all the help. Thanks again.

[DareBee]

Forgot to mention (in case you didnt notice).
Second program has subroutines

[Techman]

One simple thing worth noting- The difference between an "A" and an "A-" command when in absolute positioning is only rotation direction. I'm not totally sure that is spelled out in the manual.
~Techman

[BW4706]

Thanks Again .