Just got me a Bridgeport Series II Interact 2 and the battery was dead so the parameters are lost. I sent Bridgeport an e-mail for help but no answer yet. Any of you who knows where i can get them?
Just got me a Bridgeport Series II Interact 2 and the battery was dead so the parameters are lost. I sent Bridgeport an e-mail for help but no answer yet. Any of you who knows where i can get them?
look in the bridgeport heidenhain parameter thread and see if there are any for a series 2, might get you close
Series 1 and 2 are similar except for travel limits, distance to each switch, backlash, etc.
More relevant is to have the correct version with the correct amount of parameters.
George
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Link to TNC 150 parameters! https://docs.google.com/gview?url=ht...df&chrome=true
Not exactly the machine i got but close enough:banana: