Tool Length Offset Register:
Hi All,
Our shop has a HAAS TM3 which I use daily, I own a FADAL TM also.

When using the Fadal, I can use different H offsets for any given tool For instance Tool 3 I can use H3 or H10 and it will use the offset listed in the called H ofset register.

I have NOT figured how to accomplish this with the Haas, if I call T3 AND THEN G43 H6 in my program it faults when trying to load the program.

This ability would enable me to use the same tool on multiple fixture offsets in a single program.

It has a 10 tool changer, can I call tool 3 tool 13 and use H13 and do this?
Am I failing to see some simple way to do this?