I have a new machine and need some help to get it running. It has an ATC tool changer... how can I get it to tool change in MDI so I can load and probe all tools? It keeps giving me 173 and 176 alarms.
It'll be something stupid, its a operator issue rather than program! Had a quick look at mazatrol and I get the jist of it. The machine was bought in from Germany and is all in Germen so all the manuals are no use to me! I have changed Eprom so screen in back in English but some small things are stumping me! All help welcome and greatley appreciated... I really need to get this running! Many thanks
Thread: Program
Results 1 to 12 of 12
-
03-07-2013, 10:28 AM #1
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
Program
-
03-07-2013, 12:59 PM #2
Registered
- Join Date
- Jan 2011
- Posts
- 350
You got to set up your macros and data for your ATC if they're not properly set up yet, check your machine manuals, that's all PLC alarms. Check your position switches and pneumatic/hydraulic valves for your ATC as well.
-
03-08-2013, 04:11 PM #3
- Join Date
- Oct 2003
- Posts
- 321
Hallo,
what type is Your machine. Have You Mazatrol?
-
03-08-2013, 04:58 PM #4
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
Its a slant turn 40N with ATC and AJC and yes it has mazatrol and ISO but I cant find the page to change it over, when it was stuck in german I managed it but now its in english I cant find the same option!
-
03-08-2013, 05:19 PM #5
- Join Date
- Oct 2003
- Posts
- 321
Mazatrol T32-2 or T-3 ?
How do You change from german to english ?
-
03-08-2013, 06:31 PM #6
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
Thats her the very same machine :-) I had to change the Eprom chips in the board! Its a T3.
-
03-08-2013, 06:55 PM #7
- Join Date
- Oct 2003
- Posts
- 321
did you have experience with any Mazatrol?
-
03-08-2013, 07:06 PM #8
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
No but I had a look around the controler I get the jist of it stock size, dia to cut too, rad or chamfer etc tool selection but no not to be any good with it! I can program G codes no problem.
-
03-08-2013, 07:25 PM #9
- Join Date
- Oct 2003
- Posts
- 321
You must get help, because this machine must be programmed in Mazatrol if You will work effektive.
I will look for a programming book in english. Please look for somebody near to You for 4 - 5 hours to tell You basics in Mazatrol.
-
03-08-2013, 07:56 PM #10
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
I'm trying our local mazak dealer is slower than a snail as I bought the machine second hand!!! But I@m trying to find some one! If you could find a manual on PDF it would be great!!
-
03-08-2013, 08:02 PM #11
- Join Date
- Oct 2003
- Posts
- 321
I will do my best!
-
03-08-2013, 08:27 PM #12
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 19
Thank you
Reply With QuoteSimilar Threads
-
Troubel looping a program in a 5 axis lathe program (sub spindle won't line up)
By sul1 in forum G-Code ProgramingReplies: 4Last Post: 03-06-2013, 07:56 PM -
Mazatrol Program into a G Code Program
By fuzzman in forum Mazak, Mitsubishi, MazatrolReplies: 15Last Post: 09-25-2012, 04:27 PM -
Outputting Common variable values into a program (with automated program number)
By yaji63 in forum FanucReplies: 0Last Post: 12-27-2010, 09:55 AM -
tl-2 program integrity error and program data error alarm #'s 212 250 need help
By CNChelp in forum Haas MillsReplies: 12Last Post: 03-15-2010, 02:19 AM -
Anyone got any basic examples of a program using a subroutine/program?
By Darc in forum CamSoft ProductsReplies: 11Last Post: 10-09-2005, 05:45 AM
Posting Permissions
