Hey everyone, we have various 640m controlled horizontal mazak mills and i am trying to automate as much of our setting up process as possible. I am having problems trying to use the G10L41 command as discussed in the three-digit g-format at the back of the programming manual for mazatrol programming (not EIA/ISO).
Any advice on using this command would be appreciated.
Results 1 to 3 of 3
-
02-16-2006, 02:55 AM #1
Registered
- Join Date
- Oct 2005
- Posts
- 3
Mazatrol tooldata input through iso using G10L41
-
03-31-2006, 05:14 AM #2
Registered
- Join Date
- Mar 2006
- Posts
- 34
ok
can u tell me in datail ur problem
-
06-06-2006, 09:53 PM #3
Registered
- Join Date
- Jun 2006
- Posts
- 478
The "G10" word is used to "write" various inputs such as WPC'S, tool lenghts, dia's etc.
for example G90 G10 L2 P1 Y0 Y0 Z0 would write X0 Y0 Z0 to the G54 Work Piece Coordinate area. So what's the specific problem?
Reply With Quote
Posting Permissions
