I have been working with a demo version of v9, and can't believe you have only one "undo", and not even that if you back out of the function to soon. Is this right or am I doing something wrong? I find this very frustrating especially in creating geometry, trying to delete wrong moves. Of course being that I am just get a feel for the program, there are alot of wrong moves.
Thread: Really, only one undo!
Results 1 to 2 of 2
-
09-27-2003, 02:28 PM #1
Registered
- Join Date
- Apr 2003
- Posts
- 57
Really, only one undo!
We are open 24hrs. - just not in a row.
-
09-27-2003, 03:23 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 1876
Hi Mike.
You're right, only 1 undo, if you're lucky.
(That's not always guarenteed to work)
This issue has been brought up before, and has been addressed for the next release.
I was frustrated about this when I started using it also, but I don't even notice it any more.
Creating geometry, toolpaths etc is fairly easy and quick, so the undo really isn't an issue.
'RekdMatt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Version 19
By CNCdude in forum BobCad-CamReplies: 16Last Post: 11-26-2003, 05:15 PM -
Version 19 tip and tricks
By cncadmin in forum BobCad-CamReplies: 2Last Post: 11-26-2003, 04:42 PM -
Paper space Model space ??
By cncadmin in forum AutodeskReplies: 10Last Post: 05-29-2003, 12:07 PM
Posting Permissions
