I cant get pc to sync to my cnc using hyper in windows in rs232 port I have no idea what to do hep please
I cant get pc to sync to my cnc using hyper in windows in rs232 port I have no idea what to do hep please
Dynapath? Yasnac? other?
yasnas mx3
http://www.yaskawa.com/site/dmcontrol.nsf/link2/TKUR-5EKM6J/$file/TOE-C843-9.32C.pdf
it all starts on page 19.
=i have try to read that idk if i am doing it right i was also told i may have the wrong 232 cable but idk. do i have to have a program file in order for the pc to talk to the cnc. i have just been trying to send a m code in note book to see if they would talk do i need a full program first?
Yes, and it must be formatted correctly. Easier to punch a working program from the control to the PC first, so you can see how its formatted. The cable diagram is also on page 19.
thanks i will see what i can do.
how do i send from control to pc?
prob fixed had bad mother bord thanks for help