[mantenim]

I have romi machine (lathe G280)
fanuc 0i mate TB

the turret rotation is controler with servo amplifier A06B- 66093-H152

Do you have the manual for the servo amplifier?

I have changed the batery in the servo amplifier, and the turret lost the absolute position.

how fix it?
do you have any procedure for zero point?

[Heavy_Metal]

Hello,

For the Beta Series AC Servo Motor, manual GFZ-65232EN/02 ( A06B-6093-H152 and more ), check next website;
http://www.prodsa.com.ar/integradore...LS/65232EN.PDF

For the Beta Series Servo Motor I/O Link Option, manual GFZ-65245EN/01 ( A06B-6093-H152 and more ), check next website;
http://fanuc.pennineuk.com/library/p...cbetadrive.pdf and http://fanuc.pennineuk.com/a06b-6093-beta.htm

Regards,

Heavy_Metal,
The Netherlands.

[GTMondock]

I have the same amp with same problem. The links to reference zero do not work. Does anyone else have the procedure?
Thanks

[zavateandu]

usualy the beta driver for the turret is linked to power mate manager alias PRG MATE,PMM Manager
The power mate menu you will find by going with the right arrow
when you enter the Power Mate manager you need to go to system and paramters and the paramter for the zero is the parameter 11 bit 0
When you loose the reference that bit will be 0 so you need to make it 1 on the tool number 1
So be sure that the tool umber 1 is the working tool and make that parameter 1
Power off/on and you should be good

[GTMondock]

Thanks for the info. We are up and running!