Hello Forum,
I'm researching my first CNC router. My max. budget is around $5k. I'm leaning towards a 24 x 48" cutting area, but could go smaller if necessary.
I'm primarily seeking something for prototyping and light production. Materials would be MDF, thin hardwood, bamboo plywood, & occasionally aluminum and acrylic. Clean, accurate cuts are more important than rapid cut speed.
I've narrowed down my options to the following:
FireBall Meteor:
http://www.probotix.com/FireBall_Meteor_cnc_router/
Zenbot 2448:
http://www.zenbotcnc.com/all-product...nc-router-1CNC
Shark HD 2.0:
http://www.rockler.com/product.cfm?page=31987
CNC Router Parts kit:
http://www.cncrouterparts.com/crp244...kit-p-164.html
I'd really appreciate any feedback that anyone may have on these options.
- The FireBall Meteor appears to be a quality full package, though you're required to use the included PC w/ EMC2 Control Software. Would that be a drawback?
- The Zenbot seems to be a good option at a lower price. Is anyone familiar with these? Is the belt drive something to watch out for?
- The CNC Router Parts kit seems to be a good value for a robust machine, though I'm afraid it'd be too much of a project for a newbie.
Thanks in advance for any insight,
Brian