[systemlord]

Hello everyone. I have a problem with my VM1. Today, all of the sudden , as a program was running perfectly normal, it interrupted, by an error msg : "OVERLOAD FAULT - RESET OVERLOAD FAULT "

There is no way i can reset this thing. All relays atm are working. Any idea or someone that had same problem can help?
thank you in advance.

Forgot to mention, cant run ANY program, if this fault is nor clear/reset.

[bloke]

Check in the two white boxes under the cabinet. it'll be either the coolant or the auger tripped in one of the boxes. press the blue button to reset.

[systemlord]

Check in the two white boxes under the cabinet. it'll be either the coolant or the auger tripped in one of the boxes. press the blue button to reset.

White boxes on the back of the machine?

[systemlord]

Two white boxes? On the back side of the machine?

[bloke]

Yes. Just under the electrical cabinet. About 200mm tall, 150mm wide and 150mm deep. Four screws holding the cover on.

[systemlord]

ill try that 1st thing in the morning, ty in advance. ill let you know with the results

[systemlord]

Good morning, and thank you bloke. Saved the day, was the coolant relay. something passed through the filters of the cabin to the coolant tank, and gave the coolant pump a hard time. Thnx again, keep it up :wee: