Hi All,

I'm new to Okuma machines (Only programmed Fannuc and Fadal) and I have some questions on what I am doing wrong. I've managed to load programs into the machine and I can edit them just fine, but when I load the program to the Auto side the only thing that shows up on the program screen is:
O2222
M2
This displays on both the A turret and B turret sides. I had an old program (already in the machine) that would show up on the A turret side, but when I re-loaded it the display now only shows the Program# End Program code. Here is a sample of my code:

$UHMW1.MIN%

O1111

(UHMW1)
(TOOL-1 OFFSET-1)
(OD ROUGH RIGHT)

(FACE)
NB100 G0 X-6. Z10.
M14
T040404
G97 S1457 M03 M42
G42 G0 X3.9314 Z6.3
G50 S3600
G96 S1500
Z6.2582
G95 G1 X3.79 Z6.1875 F.01
X-.0625
G0 Z6.2875
G1 G40 Z6.3875
...
(FINISH NPTS 1-11.5 THREAD)
NB500 G0 X-6. Z10.
M14
T0303
G97 S200 M03 M40
G0 X1.5455 Z6.4058
G71 X1.1441 Z5.1875 I.0311 B29 D.0719 H.1391 M32 M75 F.087
G0 X-6. Z10.
M02
%

Any help would be greatly appreciated,

Zack

PS It's just me and my dad at our shop. I asked him and he doesn't know either :-)