[teal854t]

We have Mitsubishi EDM model EA12ME (EA Series) and something went wrong, it didn't boot completely and froze. So we did restore and boot up fine now. But lost the parameters. How can I get to parameter screen? Does it have any password like Fanuc to enable parameter write? I've never done Mitsubishi. I was able to get to a screen with PITCH COMPE and enter some values. I've got sheets with parameters to enter. Help.
Thanks

[Makrep]

Is it a 64 bit control or advance control (touch screen)?

[teal854t]

It is not a touch screen.

[Makrep]

From my memory, you have to go to maintenance and then make the mouse hover over parameter and make a right click, you should see a box appear with Maintenance user and maintenance maker appear, hover over top one and left click, repeat the process again to tick the other one also. This will open up all parameter pages, but take care when in these pages, not to enter incorrect data.

[a1diesinker]

you should have disks with every thing you need on them there's a switch in the cabinet you have to flip be fore you load