I previously posted this in the Smithy forum, but got no response.
I have a 3 in 1 Mill/Drill/Lathe that I would like to add some sort of DRO to. Since I have practically no money, I am looking at the Grizzly
H8176 Cutting Depth Digital Readout for G0516 at $159.95 +SH
This is similar to one that Little Machine sells but appears to have solved the interference between the displays that keeps the compound from turning around.
Does anyone have any experience with this display and or the installation on the Enco, a Harbor Freight, the Smithy or other similar 3 in 1 machines?
My machine (see photo):
Model #328-1308
Enco 3-in-1 Machine;
Swing Over Bed: 16-1/2";
Distance Between Centers: 15-3/4";
Cross Slide Travel: 4-3/4";
Spindle Bore Diameter: 3/4";
Spindle Nose Designation: 3MT
Low Price: $1,797.98 ea
As far as I can tell the overall dimensions of the cross and compound are similar and I do have a milling machine to modify the mounts if it is possible actually install this on my machine.