Originally Posted by
cjdavis618
Very interested in this. Looking to purchase a complete mill package very soon.
What is the ETA of specs being online and the machine becoming available for purchase?
Thank you for your interest in our new PULSAR Servo mill. We have just returned a very successful presence at the Cabin Fever EXPO in York, Pennsylvania, where we were met with great enthusiasm regarding this new unveiling. We will be taking some professional photos of this mill this coming week for reference purposes which you will be able to see on our webpage scheduled to be posted within a 2 week period from today.
We would like to point out that the PULSAR Servo series is intended to be a fully automatic system by upgrading with our PDB and ATC conversion KITs ready for mounting on the pre-casted mounts. In a standard configuration, the mill presently has a lever drawbar available for rapid tool changes without using shop air or electric power of any sort. These enhanced features will turn this mill into a powerhouse with full automation that our customers have asked for in the past. More about these features will posted in our forum at the CNC zone and in our webpage very soon.
The PULSAR Servo mills are in production presently and will be available for sale approximately by June 30th. Since we have a high interest in this particular model, we have opted to start reserving orders as well as creating a distribution list for direct release of additional information. If you wish to add your name to this list, please contact [email protected] and we will be happy to assist you and discuss more specific details.
Please also note that our machines can be 100% financed with in house leasing program.
Some of the features of the PULSAR Servo mill are shown below for your review. We hope this helps with your questions and we look forward to your inquiries and comments.
Regards,
Novakon Team
Pulsar Servo features:
1. Spindle head specifications:
- 1.2 KW servo AC spindle motor
- 0-4500 rpm speed
- Rigid tapping standard
- Lever draw bar
- R-8 spindle
2. 25% heavier casting than Torus bed mill
3. P4 grade ball screws- 20mm diameter x 5mm pitch
4. Less than .001” backlash
5. 220 VAC, 15A input power
6. Solid State limits sensors
7. One shot oil pump
8. Castings heat treated and sandblasted
9. Powder coated durable finish on sheet metal
10. Table Specifications:
- 15.75” x 9.5” x 12.5” work cube
- 200mm x 600mm table size
- Powerful axes AC servo motors -1KW
- 500 IPM rapids
- Four 9/16” T-slots (45mm spacing)
- Table work shelf
11. Stand Specifications:
- Large 7-gallon coolant reservoir tank
- Coolant containment system included
- Sloping chip pan drainage system emptying under bed mill
- Two 90-Watt coolant pumps
- Dedicated coolant pump with hose/spray gun for general chip clean up
- Large pull out chip collection drawer with filtration screen
- Easily moveable using pallet jack
12. Controller Specifications:
- PC with windows operating system (Optional)
- BOB with automatic tapping switching capability
- Commercial servo AC drivers
- Smooth Stepper inline controller (Optional)
- MPG pendant with E-stop (Optional)
- Transformer standard for 4th axis addition
- 4th axis stepper driver (Optional)
- MACH3 demo installed and tested (if PC is purchased)
- MACH3 license (Optional)