586,100 active members*
3,124 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > Gecko - CPU HeatSink Cooling Fan?

Thread: Gecko - CPU HeatSink Cooling Fan?

Results 1 to 3 of 3
  1. 02-12-2006, 04:35 AM #1
    stdly
    stdly is offline Registered
    Join Date
    Dec 2005
    Posts
    49

    Gecko - CPU HeatSink Cooling Fan?

    Can I use Cpu Heat Sink Cooling Fans on the Gecko's or will the fans cause interference?
    Reply With Quote Reply With Quote
  2. 02-12-2006, 10:26 PM #2
    giorgiocnc
    giorgiocnc is offline Registered
    Join Date
    Jan 2005
    Posts
    20
    I'm using Gecko 320's with CPU cooling fans for more than three months now, so far no problem. A computer CPU is far more sophisticated circuit than a Gecko, I guess if a cooling fan doesn't cause interference there, it shouldn't make any trouble next to a Gecko.
    Reply With Quote Reply With Quote
  3. 02-17-2006, 11:38 PM #3
    stdly
    stdly is offline Registered
    Join Date
    Dec 2005
    Posts
    49
    Quote Originally Posted by giorgiocnc
    I'm using Gecko 320's with CPU cooling fans for more than three months now, so far no problem. A computer CPU is far more sophisticated circuit than a Gecko, I guess if a cooling fan doesn't cause interference there, it shouldn't make any trouble next to a Gecko.
    Thanks I bought 3 today $2.99cdn each with fans. Even though my G202's might not need them at 2.8 and 5.5 amp. Cooler is better I would guess?

    Steve
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules