[b25p51]

After the motherboard in my computer died, I had to reload all software on another hard drive. Now after two days of trying and not beening able to read Chinese, the best results that I have been able to get is that when I click on the lasercut 5.3 icon to start it, it comes up with a window that states it's looking for the lasercut.exe file and can not find it. When I look in the file folders the lasercut.exe file is there.
Anyone have any ideas or possibly a copy of lasercut 5.3 (in English preferred) that I could try?
Thanks,

Rick

[DavenUK]

Think you can download it from LaserCut5.3

[DavenUK]

Not tried it though

[b25p51]

Thanks for the link. It works to download the manual, but you have to go to [email protected]. to get to program? not tried that yet.

Rick

[amr bassuony]

hello this location not right

[JeanLouis]

I found the correct link by manually writing it in the adress bar :
http://www.leetro.com/english/down/L...-Installer.rar

[JeanLouis]

It was well hidden in their website : http://www.leetro.com/english/down/L...-Installer.rar

[Heinzben]

Hola soy nuevo en el campo del laser, tengo una maquina para hacer calado en madera, estoy instalando lasercut 5.3 en windows 7 32 bits, hasta ahi todo bien, el programa inicia envio el paquete a dispositivo MPC6535, luego voy a la maquina para darle inciar y me responde pitidos y en pantalla sale un mesaje soft stop.

[Heinzben]

Hi I am new to the field of laser, I have a machine to make openwork wood, I'm installing lasercut 5.3 on windows 7 32 bits, So far so good, the program starts sending the package to MPC6535 device, then go to the machine to give LAUNCH and he says beeps and the display comes a soft mesaje stop.