We have a part that we make, looks like a hockey puck, hole in the middle and an O ring groove around the outside. I'm using a face/turn/groove tool and would like to incorporate some corner rounding/edge breaking. Do a rough face, rough turn, rough O ring. Then do a final profile with radius along the face and OD/Oring. IPS can get me the rough operations pretty easy. But am I looking at long hand to incorporate the radius at the outside edge of the part and the tops of the Oring groove? The TL1 is a 2013 if that makes a difference. Have not played with the DXF import. Anyone have experience with the DXF feature?
Thanks,
Steve