[wavewizards]

Hi I have three ma860h drivers now when testing my set up on the bench I have one driver that keeps throwing on the red light if I wire it up but don't connect a motor the light stays green but if you shutdown and connect a motor to the driver it goes red I have checked the wiring for the motor and also put a different driver on that circuit and its find so must be some thing with the driver is there anything I can do to it or scrap it and replace. Bloody things ain't cheap :-(
Many thanks in advance

[jalessi]

Wavewizards,

Why not contact the manufacture (Leadshine) and try getting a RMA?


China Headquarters
Address: 3/F, Block 2, Nanyou Tianan Industrial Park,
Nanshan District Shenzhen, China
Web: Leadshine Technology Co., Ltd. - the leading global motion control product manufacturer
Sales Hot Line:
Tel: 86-755-2643-4369 (for All)
86-755-2641-7674 (for Asia, Australia, Africa areas)
86-755-2640-9254 (for Europe, America areas)
Fax: 86-755-2640-2718
Email: [email protected]
Technical Support:
Tel: 86-755-2641-8447 and 86-755-2647-1129
Fax: 86-755-2640-2718
Email: [email protected] and [email protected]
Leadshine Hong Kong
Address: Rm 3, 9/F, Block E, Wah Lok Industrial Center,
31-41 Shan Mei St., Fo Tan, Shatin, Hong Kong
Tel: 852-2952-9114
Fax: 852-2952-9395
Email: [email protected]
Leadshine U.S.A
Address: 15209 Dufief Dr., Gaithersburg, MD 20878, USA
Tel: 1-301-433-3780
Web: Leadshine Technology Co., Ltd. - the leading global motion control product manufacturer
Email: [email protected] and [email protected]

Good Luck,

Jeff...