My programmable coolant nozzle is not working. When the power is off it will move freely , but when I power the machine up it will go to a preset location and not move at all. With g code or hot keys on control. Do I need to turn a parameter on ?
My programmable coolant nozzle is not working. When the power is off it will move freely , but when I power the machine up it will go to a preset location and not move at all. With g code or hot keys on control. Do I need to turn a parameter on ?
Parameter 57 bit 11 should be set to a 1 to enable the programmable coolant spigot.
If it on then I would check to see if it is getting power.