I have a fairly simple contour I want to post in incremental so i can use it in a sub program. I have no idea how to achieve this as I have never tried. From reading the help documentation you don't simply select incremental under your tool path parameters. Any help would be much appreciated. I am using X3.
Thanks.
Results 1 to 3 of 3
-
05-06-2013, 08:59 PM #1
Registered
- Join Date
- Apr 2008
- Posts
- 87
Having trouble posting in Incremental Mode (G91)
-
05-06-2013, 11:19 PM #2
Registered
- Join Date
- Apr 2008
- Posts
- 87
Never min I figured it out.
For anyone else needing to do this you go into Toolpath Parameters / Misc. Values. the second option "Absolute/Incremental, top level [0=ABS, 1=INC]"
-
05-07-2013, 02:39 PM #3
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Well I see you found it. have fun.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With QuoteSimilar Threads
-
Trouble posting code
By Milton in forum BobCad-CamReplies: 3Last Post: 12-26-2012, 07:14 AM -
Trouble posting...
By thach47 in forum Hardinge LathesReplies: 3Last Post: 10-12-2012, 12:59 AM -
IJ Mode is incremental
By mmonti in forum DIY CNC Router Table MachinesReplies: 2Last Post: 05-14-2012, 04:12 AM -
Incremental Vs Absolute mode
By chilly2k in forum Mach Wizards, Macros, & AddonsReplies: 4Last Post: 03-06-2009, 11:54 PM
Posting Permissions
