My X3 is cutting 0.010” over size, I have checked the kernel speed and done a MDI test by inputting X 1.00” and machine moves 1.00 dead on.
So anyone got an idea what’s going on??
Thanks
Mike
My X3 is cutting 0.010” over size, I have checked the kernel speed and done a MDI test by inputting X 1.00” and machine moves 1.00 dead on.
So anyone got an idea what’s going on??
Thanks
Mike
If MDI input is accurate then it's probably something in your CNC input code. Post a .tap file which is overcutting.