Hi guys,
Been trying for days now to create a canopy recess in my fuse. It needs to be a solid when complete so I can do a Boolean difference for mold making...
The canopy would be about .015 thick.
Thread: Create a relief in a surface.
Results 1 to 3 of 3
-
05-09-2013, 07:58 PM #1
Registered
- Join Date
- May 2013
- Posts
- 4
Create a relief in a surface.
-
05-10-2013, 03:34 AM #2
Registered
- Join Date
- Jul 2004
- Posts
- 42
You views are labeled wrong. The way I did my canopy was to draw a curve on the right view and project to the C plane. Extrude the curve to pass fully thru the fuselage. Use the split command to split the canopy from the fuse. I hope the attachments will help you see what I am saying.
Joe
-
05-11-2013, 07:16 PM #3
Ghost
- Join Date
- Dec 2008
- Posts
- 4548
Not sure of the exact outcome you want. If you look at your picture from the front view, draw a curve like that red shape and extrude a surface from it across the fuse. Then you can use the boolean split or something else to get an object to work with.
Reply With QuoteSimilar Threads
-
Fifty ways to create a relief - Part five
By cncadmin in forum EnRouteReplies: 0Last Post: 10-24-2012, 06:40 AM -
Lesson how to create relief from photo
By Melkiades in forum ArtCam ProReplies: 0Last Post: 04-26-2012, 09:18 AM -
How to create fillets on this surface
By gorby in forum MastercamReplies: 4Last Post: 03-19-2012, 06:46 PM -
How to create surface
By gorby in forum MastercamReplies: 4Last Post: 11-22-2010, 08:09 AM -
How to create 3D surface
By kiemkhach in forum MastercamReplies: 2Last Post: 07-04-2008, 12:48 PM
Posting Permissions
