586,655 active members*
2,710 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > GibbsCAM > Fanuc Oitb GibbsCAm post

Thread: Fanuc Oitb GibbsCAm post

Results 1 to 3 of 3
  1. 03-04-2006, 02:32 AM #1
    travlinman5
    travlinman5 is offline Registered
    Join Date
    Mar 2006
    Posts
    6

    Fanuc Oitb GibbsCAm post

    I am looking for a post processor for the Fanuc Oi-TB control that can be used by GibbsCam.

    Anyone out there have a file you can Email me.

    Travler
    Reply With Quote Reply With Quote
  2. 03-30-2006, 12:08 AM #2
    sld4121
    sld4121 is offline Registered
    Join Date
    Mar 2006
    Posts
    158
    Any standard Fanuc turning post should get you close. I use a slightly modified post for an 0TC control and it works fine for me. The issues you will run into are M-codes, which vary by machine manufacturer, and output for milling if your lathe has that capability. If it is milling you need, your reseller is the best resource. Otherwise, PostHaste can be easily configured to output your code correctly.
    Reply With Quote Reply With Quote
  3. 07-10-2008, 03:15 AM #3
    travlinman5
    travlinman5 is offline Registered
    Join Date
    Mar 2006
    Posts
    6
    OK, Can you send me a a file with the post you are using?

    Thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules