We are a cut/form company out of Tulsa, OK. And we have started to run into an issue that MTC can't seem to help us with. Over the years our Trumpf and Tanaka machines have started requiring different programs for the same class machine. We are looking for somebody that can write us a post processor of sorts that will output multiple programs based off of certain class. Ie. When we output a program for our Trumpfs, we have to output the code 3 different times to get all the code on the network for all those machines. We would like to be able to output it once and have it automatically output all 3 different programs.
Results 1 to 2 of 2
-
05-29-2013, 03:33 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 5
We are looking for some custom post processor work to be done with our MTC Pronest
-
09-11-2013, 12:56 PM #2
Registered
- Join Date
- Oct 2010
- Posts
- 5
I can help with that if you are still in need of a solution.
Reply With QuoteSimilar Threads
-
Need post for Pronest and Torchmate
By SpeedFreak039A in forum Post Processor FilesReplies: 3Last Post: 12-16-2015, 01:31 PM -
FIDIA/WORK NC POST PROCESSOR PROGRAM NEEDED
By cmsinc in forum Post Processor FilesReplies: 4Last Post: 11-10-2015, 11:08 PM -
Pronest post processor
By SpeedFreak039A in forum TorchmateReplies: 2Last Post: 02-22-2012, 02:38 AM -
NEED A CUSTOM POST PROCESSOR
By 1Adam12 in forum BobCad-CamReplies: 2Last Post: 04-18-2009, 02:40 AM -
Custom Post Processor Delivery?
By PinMan in forum BobCad-CamReplies: 1Last Post: 03-01-2008, 07:32 PM
Posting Permissions
