Does anyone know how to convert an .mcx file extension into one that V20.6 can use. I've tried altering the file extension through another program and it didn't take. I am not sure but that may be Mastercam. I've asked them to resend in .iges or.stp but I'm not sure if they can. Someone else did the initial cad drawing for them. If anybody knows of a viewer or traslator that is cost efficient (cheap or free) I would appreciate the help.
Rick
Thread: .mcx to usable file
Results 1 to 3 of 3
-
03-07-2006, 12:50 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 57
.mcx to usable file
-
03-07-2006, 01:17 AM #2
Registered
- Join Date
- Sep 2004
- Posts
- 145
Yes, that is a MasterCam V10 file.
Email it to me and I'll convert it to either format at work tomorrow.
[email protected]Insanity "doing the same thing and expecting a different result"
Mark
www.mcoates.com
-
03-07-2006, 02:10 AM #3
Registered
- Join Date
- Jul 2005
- Posts
- 57
Mark,
E-mail sent. Thanks for your help.
Rick
Reply With Quote
Posting Permissions
