Hi!
I ordered recently 2x RM2005 (800 & 606 mm in length) from Linearmotionbearings2008 and my experience so far wasn't good.
The first shipping I received, both screws were shorter and he forgot to mill my key slots...
I requested the correct length and machining and after a long discussion he agreed to do the right thing. He sent only the screw.
So, I received the second batch and I found two different issues:
1) After reading several posts here, I decided to check how many balls were supplied. One nut has 61 balls, one 57 (I believe 57 is the correct number, am I right?).
2) Check the attached picture please, the surface is completely different. (on top of the picture my first order, bottom = the "fixed" order).
Is that correct? I think he sent something dodgy....
Thanks!