[onecut]

WidgitMaster,

I found your up to bate Schematic and it has the 5 wires going to the 107, sorry about that just got lucky and dug up the newest one.
Thanks for taking the time for making the schematic, it really helps, thanks

[shujaa]

you may use the air shock used to hold up rear car hatches. weigh you gantry and weigh the hatch. and match as close as possible.

[skrubol]

you may use the air shock used to hold up rear car hatches. weigh you gantry and weigh the hatch. and match as close as possible.

Several problems with using those. They have a lot of damping, which you don't want fighting the rapids of your Z axis. They're fairly non-linear I believe. A lot more force fully compressed than extended. They have fairly limited life times, they aren't meant to be used on something that's constantly going up and down.
Using pneumatic cylinders with an external reservoir really does seem the way to go on a router.

[widgitmaster]

Here are a few more projects finished!

[Bubba]

Ah ha, now I know why you haven't posted for a while. Been to busy making fantastic designs!

Excellent as always:})

[widgitmaster]

Ah ha, now I know why you haven't posted for a while. Been to busy making fantastic designs!

Excellent as always:})

Thanks !
I've made several custom plaques with people's names on them, most did not want them posted online!

[widgitmaster]

I've been going to an average of three Dr's appointments per week for the last 9-months, here is a picture of my left foot taken today!
That's 11-months after the motorcycle accident!
I still run Big Red from a wheelchair, and have nurses visit my home every 24-hours to change the bandages!
The driver of the car was fined $450, and had to attend driving school for 30-days !
If I stuff my bandaged foot into a boot, I can ride my Trike without difficulty, but the pain from pressure wont let me ride for too long

[skrubol]

Eek!
You getting any money out of the driver or his insurance?
My accident was about a year before yours and I still haven't seen a dime. My injuries weren't as bad as yours though.

[widgitmaster]

Eek!
You getting any money out of the driver or his insurance?
My accident was about a year before yours and I still haven't seen a dime. My injuries weren't as bad as yours though.

Yes!
Get a better attorney, preferably one who rides a motorcycle!

[widgitmaster]

Well, I managed to get two more finished today!

[Bubba]

Cool, Like them

[widgitmaster]

A little more progress today!

[widgitmaster]

How's this

[widgitmaster]

Made this one in appreciation of my Nurse!

Source Code in VCarve-Pro format

[shujaa]

Hi widgit master

That foot photo is really frightening. I hope you will be on your feet very soon. Take care.

[widgitmaster]

Hi widgit master

That foot photo is really frightening. I hope you will be on your feet very soon. Take care.

Thank You!

[widgitmaster]

The plaque was given to one of the Thunderbird pilots by my USMC friend this weekend!

[bill south]

Wow Widgit;
Nice plaque. I had the opportunity to work with the T-birds when I was stationed in Biloxi Ms. in (or around) 1972, I was the backup radio (ground to air) and got to listen to all the chatter between pilots and command. What an experience! Loved those flashy jump suits they wore and what nerves of steel!
Once again, great job (as usual)!!
Saw the pix of the heel. Hope the heel is continuing to heal for the upcoming riding season!!!! (forgive me, couldn't resist)
Bill

[widgitmaster]

Wow Widgit;
Nice plaque. I had the opportunity to work with the T-birds when I was stationed in Biloxi Ms. in (or around) 1972, I was the backup radio (ground to air) and got to listen to all the chatter between pilots and command. What an experience! Loved those flashy jump suits they wore and what nerves of steel!
Once again, great job (as usual)!!
Saw the pix of the heel. Hope the heel is continuing to heal for the upcoming riding season!!!! (forgive me, couldn't resist)
Bill

How's it going Bill!

Thanks! The foot is healing much faster, now that I've been going to the Wound Care Clinic!
I won't post any more ugly pictures, as it really freaks people out!
I can only hope they'll WATCH more carefully for motorcycles, as it will save lives!

Widgit

[shujaa]

I wish you a very quick and complete recovery.
Can any one advise me on the following issue. I want to weld some steel braces to my router table frame. Do I have to take off all motors and spindle etc. ??