[tortort]

Hi Guys,
First of all, this sight is awesome.
Second,Ive got a problem and could really use some help.
Im trying to use live tooling (slot cutter) and plunge along z inside of a part with the main spindle rotating.
Is there a code that can give the c axis(rotation) a different feed rate from the z axis(plunge)?

Also i cant even get the c axis to rotate 360 with live tooling running.
Im trying to open the hole at Z-3.

Thanks for your time,
Ben

T0101
M76
G28HO.
G97S1000
G0X0Z.5
G1Z-3.F1.
X.1F.002
C360.F1.

[fordav11]

if you have C and Z on the same line you can only specify one feed on that same line for all axis movement.
there are many M codes required to use C and live tools. what model is your machine? do you have the machine manuals (not fanuc manuals) provided by the manufacturer? if yes the m codes will be listed there.