Are there alot of pages that Are different for the version 2.1 or a few? I don't have to print them all if I don't need to.
Thanks,
Are there alot of pages that Are different for the version 2.1 or a few? I don't have to print them all if I don't need to.
Thanks,
Hi Larry,
I had a similar question when I upgraded the plans from 2.0 to 2.1. As I had printed off the plans for my build, I did a quick review of the changes. The differences I’ve found are listed below.
I’ve printed off the errata changes and replaced the pages. Call me paranoid but I’m worried that I’ll misread something when I’m making the metal parts. :/
2.0 to 2.1 differences are:
Page 28: parts changes, errata related plus some more detail/information
Page 29: has note added in red
Page 84: change in dimensions, added .25 inch to parts U, V, and .50 inch to W (Bob said it was to allow an extra clearance for the change outlined on pages 171-178
Pages 30, 40, 44, 45, 49, 50, 54, 54, 56, 66, 66, 67, 67, 68, 70, 73-78, 147: Errata updates
Pages 131, 132: added a note referring to new sections
Pages 171 to 178: new sections
I'm the same way. Thanks for the infor.