I'm real close on my 24 x 48 router table. I am now starting my enclosure for the controllers. The DMM servo kit is a plug in system with all the connectors supplied with the kit. Where I am confused is wiring the limit switches. I also want to have the controller turn on the 220v dust collector and 110v a coolant mister. Will I need to wire in relays to accomplish this? I think in a thread that I have read the spindle coolant pump can be turned on by a VFD. I have a Hitachi X200 and a 3hp spindle.
I am stuck trying to wrap my head around the electrical stuff and trying to get all the parts in the enclosure with the connectors exit out the side.
Any help or diagrams/web links would be very helpful.
Thanks
Joe