[zarif]

Hi everyone

Need help,my machine simulation material stock not function..
anybody can help me.

[Aussie_CNC]

Do you have Solid Verification turned on?
Check SolidCAM Settings>Machine Simulation>Enable Verification (it's off by default)

Hope this helps!

[gonfer]

Hi Zarif,

This is very simple,

See picture below


Best Regards,
Willian

[zarif]

gonfer & Aussie_CNC Thanks,now ok alredy thank you very much love u all hahah:banana:

[claudiu220405]

Hello,

Can somebody hellp me with a little problem?
I want to simulate with stock verification in machine simulation all operations from a part, and the problem is that when I have 2 coordsys(2 origins), machine simulation is simulating the part on all origins on the same faces.

I mention that in solid verify it is showing perfect.
ls there any way to do something to change automatic the coord sys for real stock update in machine simulation?

I mention another thing that if I simulate from another operation in origin 2, machine simulation is showing me the good actual stock.
I do not use a 3d model of machine only a simple simulation.

Wait for an answer fast as you can.

Thanks.