Is there any software that will convert a regular g-code to the type of g-code a Bosch cc220 on a Trumpf 240 runs? Thanks
Is there any software that will convert a regular g-code to the type of g-code a Bosch cc220 on a Trumpf 240 runs? Thanks
I have done this with the Wittlock Engineering software and Smartcam for Trumpf's and other machines. Shoot me an e-mail [email protected]
Greg
Home page: http://www.ctcn.net/~3kings/index.html
greg
this is eric tangeman think i worked with you at enginetics. trying to create post for
lasercat 2600 tlc 2503 trumpf. appreciate any help you can give. currently using pep2001
but the post is messed up.
thx
eric
Eric, you have a PM.
Independent CNC Programmer
www.ctcn.net/~3kings/
I now have a good post for a Trumpf laser model Trumatic L2503e.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations for a lifetime.
Hello,
I am looking for g and m codes of an old Tc240 punching machine with a Bosch controller.
Could someone help me?
Thanks in advance.
Michael