[BulleTxMagneT]

what software do i need to cam / create g-code for Amada Gemini Laser Machine. I have my 2d .dxf drawn up, but cant do anything with them yet, thanks.

[ravin]

Bulle tx magnet
u told that u hv 2d dxf file
but i think ur machine cant read dxf format
machine reades only machine language
so u can use any cam softwer using in wire EDM machine
it will helps u
u just make a profile in the software
and softer convert it in machine language
and u can send it in machine through DNC or manual data inputor as part programme also
ok
Chreers
RAVIN.

[ravin]

visit once a day in chat room

[BulleTxMagneT]

thank you for your reply. i know the amada gemini laser can not read any .dxf format and that it only reads a machine code(g-code), i pretty much was asking which software i could use to cam or create a profile for the laser, convert the dxf to g-code and allow me to sequence the cuts and such. thank you

[Advanced Laser]

visit

www.AdvancedLaserServices.com and email us your info and trouble from the contact page or call 1-866 99LAZER (52937) and we can help with software.

Thank you

[Independent CNC]

Advance Laser, what software do you recommend for the Amada’s?

Independent CNC Programmer
http://www.independentcnc.com/

My mission is to share CNC programming innovations for a lifetime.

[Independent CNC]

Advance Laser, I sent a direct e-mail and a post with no response?


Independent CNC Programmer
www.independentcnc.com

My mission is to share CNC programming innovations for a lifetime.