I am in need to hire a MC programmer for some 4 axis programming. I own a small cylinder head shop, and have a bridgeport retro fit cnc machine, 3 axis with a 4th A axis table, run parrel with X . I dightize my know good parts, which gives a STL file out put. I need to hire in someone, to take these STL files, and get a runable G code so I can cut my parts.
If anyone is interested, email at [email protected]
Thanks
Darren
Results 1 to 6 of 6
-
03-23-2006, 06:02 PM #1
Registered
- Join Date
- Oct 2005
- Posts
- 114
Ace Master cam programmer needed!
-
03-26-2006, 06:04 AM #2
Registered
- Join Date
- Jun 2004
- Posts
- 450
Are you looking for someone to do this on site? Where are you located? I really don't feel like moving too far.
Dustin B.
================
I hear and I forget.
I see and I remember.
I do and I understand.
-
04-01-2006, 09:29 PM #3
Registered
- Join Date
- Apr 2006
- Posts
- 8
I can help you from my home.
I do contract programming.
I am very good at what I do.
Doing it for over 19 yrs. in the Aerospace field.
[email protected]
-
01-16-2008, 04:55 AM #4
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Did you ever find that programmer?Or just learning your self to do it?
Originally Posted by DRD
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
-
01-16-2008, 10:56 AM #5
Registered
- Join Date
- Nov 2006
- Posts
- 367
looks like he is in Cali http://drdracingheads.com/
Steve
www.cad2cam.netwww.cad2cam.net
Programmer/ Certified Cam Instructor
-
01-16-2008, 02:27 PM #6
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Yep he is local to me or I should say to are other office.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With Quote
Posting Permissions
