Hello guys.(flame2)
i have problem with my tool magazine.
i have "alarm no.294.: no tool selected (incorrect tno.)
machine state: the machine dose not start working cause and solution:
1.you have selected a tool number bigger than the maximum storage number or commanded zero (0).
command the correct tool number."
i don't know how to register the pocket for the tool number 21,23,25.
Thanks.
Results 1 to 3 of 3
-
07-26-2013, 08:58 PM #1
Registered
- Join Date
- Jun 2013
- Posts
- 7
Mazak vertical center nexus 510c-II
-
08-03-2013, 05:45 AM #2
- Join Date
- Jan 2013
- Posts
- 11
Easy fix every time I erase a tool pocket I go through all the other tool pocket numbers And see which one is missing. For example if you have a 30 pocket revolver look for what number your missing and enter those in to the pocket number they do not have to be in any order unlike the tool number which does have to be in numerable order. Let me know if that helped.
-
08-06-2013, 05:03 PM #3
Registered
- Join Date
- Jun 2013
- Posts
- 7
thanks
Reply With QuoteSimilar Threads
-
Mazak Nexus 510C-II Coolant Mist in the fans
By SKranig in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 03-31-2012, 11:30 AM -
Mazak Nexus 510C II Probing
By KTPDAN in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 02-28-2011, 07:29 PM -
center drill diameter developpement on mazak nexus 640m mill
By Denis13 in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-31-2008, 03:56 AM -
turn on part counter in eia on MAZAK nexus vertical mill
By Denis13 in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-31-2008, 03:49 AM -
anyone knows about Mazak Vertical Center?
By kamran67 in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 07-04-2005, 05:55 PM
Posting Permissions
