Does anyone out there have the parameters for a kiwa excel 510 with a fanuc omc control.
We didnt back them up and now they are lost.
Does anyone out there have the parameters for a kiwa excel 510 with a fanuc omc control.
We didnt back them up and now they are lost.
I used to work for the Kiwa importer. Give me a serial number for the machine and I will see what I have. Does this machine have the double arm tool changer or the drum style?
i have the parameters,please send me an email at:
[email protected] and will help you
i have a kiwa 510 excel running on my shop with 0M controller
I have a comunication problem with this kind Fanuc Series, 2 days ago appeared battery low and my bad issue was that I shutdown the CNC and replace the batteries, but when I turn on the CNC all memory was been clean, and right now I am looking for the parameters. Actually I think the big problem is by P2 and P38 it makes me crazy, I have tried for many times and I have changed and mixed, but the results are not good.
Please If you have any information about settings I am really glad with you.
This is the information about CNC:
KIWA model colt 510 control Fanuc OM
SN: ES789116
Thank you for your response.
A. Alvarez
Go to this link. It has a procedure to reload the parameters.
Shoprag Tips and Tricks from Automation Consultants
Podría enviarme el el archivo porfavor mi exel 510 perdió los parametros fanuc om excel 510 magazine tipo paraguas
[email protected] a este correo porfavor