Im using cimco software to link my t32 to a pc to store all my programs,my problem is i cant reload the programs back into the t32. I can save the programs, and veiw the programs on the pc via the controller, but when i go to load the program i keep getting the cmt misconnected error(error 515), the mazak alarm list is telling me that my cable is misconnected or a paramerter is set incorrectly. i dont have a clue how to set the parameters and if the cable was misconnected i would not be able to view or save the programs . I need help, getting very frustrating.
Thread: CMT problem mazak t32-2
Results 1 to 3 of 3
-
02-09-2006, 04:50 PM #1
Registered
- Join Date
- Jan 2006
- Posts
- 16
CMT problem mazak t32-2
-
02-09-2006, 10:19 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
If you have a fully populated cable right now, try using a 3 conductor with handshake jumpered, see the www.cadem.com site for cable & Parameters http://www.cadem.com/ncnet/dnc-detai...zak-t32-m2.pdf
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
09-18-2014, 01:54 PM #3
Registered
- Join Date
- Apr 2014
- Posts
- 11
Re: CMT problem mazak t32-2
we have the same problem today
how did you fix it
Reply With Quote
Similar Threads
-
Problem with Mazak VQC 20/40
By Pro24 in forum Maintenance DIY DiscussionReplies: 0Last Post: 09-13-2012, 02:37 AM -
Mazak ATC Problem
By chippah in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 08-15-2012, 05:19 PM -
Mazak 610 problem
By FELMAR in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 05-13-2011, 07:23 PM -
Mazak QT-200,Mazak VTC-160A,Mazak FJV-250 all pcb problem
By sting_dot in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-22-2007, 02:20 AM
Tags for this Thread
Posting Permissions
