586,043 active members*
3,687 visitors online*
Register for free
Login

Thread: Drip feed on a fanuc O-M

Results 1 to 2 of 2
  1. 08-12-2013, 02:43 AM #1
    Jmorris
    Jmorris is offline Registered
    Join Date
    Aug 2013
    Posts
    0

    Drip feed on a fanuc O-M

    Working with a supermax mill that has no tape mode and looking to drip feed the machine.

    I have found G127.5 in the ladder. It looks like to activate the G127.5 coil F150.0 and R508.6 need to be closed.

    In short even with all that I have read, I still don't know what to change (or how to change it) to make it work.

    Any help would be appreciated.
    Reply With Quote Reply With Quote
  2. 08-13-2013, 02:34 PM #2
    samu
    samu is offline Registered
    Join Date
    Feb 2007
    Posts
    314
    F150.0 is M function code read signal. Try to find what activate R508.6. The F150.0 makes me think that it could have a M code to activate drip feed.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. DAH LIH MCV-610 W FANUC 10M - DRIP FEED
    By BRANDONCNC in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 05-04-2012, 04:24 AM
  2. DAH LIH MCV-610 W FANUC 10M - DRIP FEED
    By BRANDONCNC in forum Fanuc
    Replies: 0
    Last Post: 05-04-2012, 04:24 AM
  3. Fanuc OM Drip Feed
    By danSN in forum Fanuc
    Replies: 1
    Last Post: 01-03-2012, 03:45 AM
  4. Drip feed for Fanuc 0-MF
    By giorgis in forum Fanuc
    Replies: 4
    Last Post: 05-08-2009, 04:44 PM
  5. Fanuc 6mb drip feed
    By cowleym in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-18-2008, 11:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules