[tharris1992]

i was just recently trying to tool change our machine and when i put in the mo6 to tool change it just froze up at the spindle and i have to reference the axis to be able to manually move the atc arm out off the way and i cannot figure out how to reference it without the axis moving and binding up the tool in the atc arm. any help would be greatly appreciated thank..

[underthetire]

So you have an Okuma OSP5000 control with a Dynapath Delta control. Better get the story straight before asking questions. Cant have 2 controllers of totally different brands and no machine.

[tharris1992]

The machine is a okuma osp 5000m and it has a dynapath delta 2000m controller.

[underthetire]

No its not. OSP5000M is a mid/late 80's Okuma mill controller. Okuma also NEVER came with a Dynapath control.

[tharris1992]

I was just informed it was a retrofit

[underthetire]

Could probably still help if you can get the correct model number of the machine. IE MC3VA, MC4Va, MB56 etc.