586,052 active members*
3,950 visitors online*
Register for free
Login

Thread: New Erickson QC30 locknut setup

Results 1 to 3 of 3
  1. 08-16-2013, 03:44 AM #1
    thomasfreedy
    thomasfreedy is offline Registered
    Join Date
    Apr 2006
    Posts
    21

    New Erickson QC30 locknut setup

    Hi,

    I have a Series I CNC with the Erickson QC 30. My old Locknut went bye bye. I just bought a new one and have
    some setup question. How does one put this on? Do you have to remove the long button head screw? Also what
    is the purpose of this screw? Any help would be greatly appreciated.

    Thanks,
    Thomas
    Reply With Quote Reply With Quote
  2. 08-16-2013, 05:46 PM #2
    thomasfreedy
    thomasfreedy is offline Registered
    Join Date
    Apr 2006
    Posts
    21
    Received info from Kennametal. Attached in case someone else is looking.

    -Thomas
    Reply With Quote Reply With Quote
  3. 08-16-2013, 10:35 PM #3
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362
    thomasfreedy

    I guess you got it figured out with the instructions

    yes you have to take out the long Button head, on a new install you most likely will have to take out all (3), as you may need to use one of the other holes, for the long Button head screw, be careful when you put the screw in, if it if not in the right place you will damage it, don't disassemble the unit, or you will most likely loose the spring & ball, ( most loose these parts), then they wonder why it won't stay locked
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Where to buy Erickson quick change QC30 Holders?
    By thomasfreedy in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 11-04-2013, 06:18 AM
  2. Deepsocket for DIN 1810 locknut?
    By sinkoman in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 08-25-2012, 01:43 PM
  3. M20 x1.5 locknut thread?
    By Michael67 in forum Linear and Rotary Motion
    Replies: 2
    Last Post: 09-17-2010, 04:43 AM
  4. int 30 qc30 iso 30 locknut??? runout problem
    By bigtoad170 in forum Bridgeport / Hardinge Mills
    Replies: 10
    Last Post: 08-19-2008, 12:08 PM
  5. Series II Erickson QC locknut question
    By bigtoad170 in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 04-30-2008, 06:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules