[Switcher]

Horse (plasma).


.

[Switcher]

Star (plasma).

.

[Switcher]

Sun (plasma).

.

[Switcher]

Moose (plasma).

.

[Switcher]

Ooops (file didn't upload).

.

[Switcher]

End of the Trail (plasma).

.

[Khalid]

SWITCHER...i think you are the poster of the week
My dear brother where you got such great cliparts?????

[Weldtutor]

SWITCHER...i think you are the poster of the week

I'll second that!:cheers:

Thanks Switcher.

[Switcher]

I would be lost without Google Images, It's all about keywords (no joke).

1) Silhouette
2) Bumper Sticker
3) Coloring Book

The best thing I've found so far, is for plasma Silhouette, all the images won't work some are to grainy (jpeg), the .GIF images work a lot better.

I think Coloring Book is better for the router.

Those keywords may sound crazy (I admit) for a cnc project, but they work, that's all that matters.

You also need to remember, you don't have to use all of an image, I might use less than 1/4 of an image it all depends on what I'm trying to do, maybe a border, or a cornice for a frame.

I might find a nice cornice design, say for a picture frame, I'll take the single design, copy it 3 times & rotate as needed so it looks correct in each corner of the frame, thats how I did the design in each of the 4 corners of the picture frame I posted here

It takes a little work to get from an image to a .dxf file, I think I've got it down to an average of 10min. (Start to Finish, after I have a basic image) or less for the plasma.

This thread is getting huge with files, we need a way to get all the files into a single zip folder. Maybe update the folder by dates that each .dxf was posted, say organize them for each month, of each year.



.

[Khalid]

Thank you switcher for your information

[Switcher]

For the guys that were teens in the 80's (me), sure you went to the AC/DC show, but did you ever go to the AD/HD show? Ha!

(router)

.

[Weldtutor]

Not a "steelhead" but plasma cuts nicely in steel.

[Switcher]

Not a "steelhead" but plasma cuts nicely in steel.

Nice!

How did you do the face, on that fish (braze)?

.

[Weldtutor]

How did you do the face, on that fish

Yes, the fish is braze welded in the face area & around the edges.

Here's another I did.

[Switcher]

"SuperCNC" (plasma).


.

[Switcher]

Sun? (plasma or router)


.

[Weldtutor]

Attached file is the striped (not bass) :devious: version of fish in post #1262 above.

[Switcher]

(router).


.

[Switcher]

(plasma)


.

[Switcher]

Movie Ticket Sign (router).


.