[ericandmollie]

#16

[ericandmollie]

#17

[Jamf2]

ericandmollie

Have you cut any of these? If so, do you have pictures? Nice job on the drawings.

Thanks for the Post!!!!

[Jamf2]

Switcher

Keep up the post. I will cut them out and post pictures when I have a chance.

Appreciate it!

Appreciate everyone's post and drawings. Thanks for sharing.

I love this site and link.

[Jamf2]

Here a "C" for ya.

[ericandmollie]

ericandmollie

Have you cut any of these? If so, do you have pictures? Nice job on the drawings.

Thanks for the Post!!!!

Yes I have cut all these drawings with a 2000 watt Trumpf Laser. Pictures, I do not have, but usually cut them out of 12 gage SS, then apply a clear powder coat, or a spray can of urethane for metal.

[Switcher]

New DXF File ---> Corner Bracket 5

.

[hualon]

Hey Switcher, could you describe your process of going from "art to part"? Specifically, I like what you're doing with the round hanging medallions wherein you insert some graphic, IE the butterfly, etc.

What steps do you take? Do you import into Illustrator? Rast2Vec in Art?

[ericandmollie]

#18

[ericandmollie]

#19

[ericandmollie]

#20

[ericandmollie]

#21

[ericandmollie]

#22

[ericandmollie]

#23

[Switcher]

Hey Switcher, could you describe your process of going from "art to part"? Specifically, I like what you're doing with the round hanging medallions wherein you insert some graphic, IE the butterfly, etc.

What steps do you take? Do you import into Illustrator? Rast2Vec in Art?

I do all my DXF files with Vcarve Pro.

You can download the demo, & try it out, VCP is actually a fun program to work with.

I try to work with only images that have clean edges, & no thumbnail images.

I know this isn't much info, all I can say is VCP is a great program.


.

[Switcher]

New DXF File ---> Fish 3


.

[Switcher]

New DXF File ---> Plaque 4
.

[joecnc2006]

Azteca people seem to look for, Extract vector format or just open in V-Carve Pro.

Joe

[Switcher]

New DXF File ---> Design 3


.

[ericandmollie]

Azteca people seem to look for, Extract vector format or just open in V-Carve Pro.

Joe

Hey Joe,
I have been working on this Aztec Calendar for the last year, granted only a little at a time. I started out with a sorta crappy image from google, vectorized it, and am in the process of retracing it with better lines and arcs. This picture is soooooo big. All I have left is the animals in the middle ring. The PDF you posted would have made my life a lot easier a year ago. I may have to restart it with this picture. Thanks for the post.