[ericandmollie]

Here is a pack of wolfs (wolves?)

[Jamf2]

Woodward

I was out of the office all day yesterday. I took Keelhauled file and cleaned it up a little. He did a great job converting the picture. I was able to clean it up pretty fast. I hope this works.

[wooderson]

That looks great, thank you.. My friend will love the way it turned out..

[fretsman]

Just got done with this one!

very nice, thank you!

[Switcher]

New DXF File ---> Cross 5


.

[gravy]

Jamf2, thanks so much for the offers to do the West Point DXF. I ended up finding an Army logo in EPS format and it converted pretty well with Ghostview. I won't put you through the trouble but thanks again.

Switcher, here are a few of your files that I cut. The pictures are pretty bad, but maybe you can get an idea.

[Astroguy]

http://www.toyraygun.com/galleryindex.html


Here is a web page full of ray guns. What are you looking for? Here are three I found on the web page. 2.5 and 3d I'm not to hot at.

Wow, thank you for the link now I have some ideas what I want. IfI could just learn to draw.

[mlind]

Hi everyone,

Just thought I would see if anyone has a dallas cowboy football helmet dxf.

((UPDATED)) Please disregard the above request for a Dallas Cowboy Helmet. I didn't realize that a Dallas Cowboy helmet might fall under copyright laws. Thank you for the help.....

Also very nice engravings below.

Thanks.

Below is a gone fishing dxf for those who like to fish.

[Switcher]

Jamf2, thanks so much for the offers to do the West Point DXF. I ended up finding an Army logo in EPS format and it converted pretty well with Ghostview. I won't put you through the trouble but thanks again.

Switcher, here are a few of your files that I cut. The pictures are pretty bad, but maybe you can get an idea.

Looks Great!

Thanks for posting the finished photos.

Did you cut those on a mill or router?



.

[Switcher]

New DXF File ---> Cobra

.

[Bluegillman]

gravy, U did a good job on the plates of Switcher's dxf, I have the same question as Switcher asked if u did those on the mill or the router. If it was the mill, did u have the cleaning out the letterings in the dxf too? I kinda like that but I can't get the files to do it.

[Bluegillman]

Switcher, I did another test I copied one of your files and one of MooseDip.DXF onto a floppy disk and took it to work and put them both on the machine as I know it could do it but found only the moose showed up. Can I ask to try another test, can u put one on the ""Attached Files"" so I can see if it did make any difference?
BTW that moosedip is a hugh file!

[Switcher]

Switcher, I did another test I copied one of your files and one of MooseDip.DXF onto a floppy disk and took it to work and put them both on the machine as I know it could do it but found only the moose showed up. Can I ask to try another test, can u put one on the ""Attached Files"" so I can see if it did make any difference?
BTW that moosedip is a hugh file!

I'm not sure I did a moose?

I've done so many files, it's very hard to keep up with all of them, between here & my Blog.

Can you post a link, or tell me what thread number the Moose DXF file is in?

Thanks


.

[Switcher]

New DXF File ---> Dragon 1


.

[Jamf2]

Thread number and link or thread number and page number. Were up to 1742 post and 146 pages. Lets make it easier to refer to a post. Especially to Switcher's post.

[dominique39]

Hello.
Whether using software to make 3D DXF files
Thank Dominique

[Switcher]

New DXF File ---> Butterfly 1

.

[gravy]

gravy, U did a good job on the plates of Switcher's dxf, I have the same question as Switcher asked if u did those on the mill or the router. If it was the mill, did u have the cleaning out the letterings in the dxf too? I kinda like that but I can't get the files to do it.

To answer you both, I milled them on a vertical machining center at work. I are a machinist, I guess. I made the cut files with Cam Bam. If you mean how did I mill out the letters instead of just getting an outline, I picked

Cam
2.5D profile

and did an inside cut, or you could use pocketing. Cam Bam is awesome, I just picked all the lettering I wanted to pocket and did it in one operation.

[Switcher]

gravy,

Good job, on the VMC.


.

[Switcher]

New DXF File ---> Design 8


.