[smartyarty53]

Hi Everyone
I am looking for a 3D puzzle of a Cicada. Can any one help ??

Thanks
Smartyarty53

[dan dimock]

WELDTUTOR

Could you please post a picture of the elephant, also the size of it.

Thanks so much

Dan

[dan dimock]

In you post to MrChips, the next to the last you post, I also was having a lot problems with some of my programs.

,
Thanks so much for all the files you have posted, and help with software
issues.
Dan

[Weldtutor]

Could you please post a picture of the elephant, also the size of it.

Normally my files are plasma arc cut.
With the extreme sub-zero weather at present here in the "great white north" my unheated shop is too cold to play in.

The attached pictures show the elephant printed on card stock & cut with scissors. (Much slower than CNC plasma cutting.)

Sizes are;
Tail to trunk distance 13".
Front legs (larger of 2 pcs.) 7" bottom to top.

Slots in the DXF need to be adjusted for the wood or steel material thickness you will use.

Have fun with the file & post your pictures please.

[Switcher]

In you post to MrChips, the next to the last you post, I also was having a lot problems with some of my programs.

,
Thanks so much for all the files you have posted, and help with software
issues.
Dan

:cheers:


.

[Switcher]

card stock & cut with scissors

WT,

Sounds like cabin fever to me?

I'm in South Carolina, I think last night was a new record low of +8 deg.


.

[runninwild400]

Weldtutor i know the feeling,,,my unheated shop was -15 the other day,,,haven't fired up my machine in a while now,,,guess I have time to ride my snowmobile now

[Weldtutor]

Sounds like cabin fever

Yes, it does seem like cabin fever to do paper cuts with scissors.

H'mmm. Maybe converting the plasma table to a vinyl cutter...............
Let me think about that.
I could bring it into the house..........! :devious:

My driveway had 24" of snow in it that I just removed with a snowblower.
Got rid of the snowmobiles after a couple of mild winters.:wee:

Staying inside recently did give me time to do some modifications to that great design 193 from your blog Switcher.
Thanks for the inspiration!:cheers:

The attached butterfly DXF should make a nice project for plasma, laser, etc.

[Switcher]

New DXF File ---> Design 194


.

[Mitsuboy]

Hello,

Would anyone happen to have a dxf file of a 57 chevy classic car? I am attaching a dxf of the moon and stars.

Thanks

[Geoszerda]

Hello All!

Does Anyone have a DXF of Leonardo's drawing about the Human body?
Thanks a lot!

[Weldtutor]

Would anyone happen to have a dxf file of a 57 chevy

Two door hardtop, gold plated trim, two-tone paint,......... remember them?

This file might need some "tweaking" depending upon how it will be used.

Have fun!

[landdesign]

I was looking through my files an ran across these. I have more at the shop so I'll look there tomorrow for the 57.

Erik

Hello,

Would anyone happen to have a dxf file of a 57 chevy classic car? I am attaching a dxf of the moon and stars.

Thanks

[landdesign]

you didnt say what you were going to do with it so i dont know if this will work for you or not...

Erik

Hello All!

Does Anyone have a DXF of Leonardo's drawing about the Human body?
Thanks a lot!

[Mitsuboy]

Thank you, Weldtutor and Landdesign for your help. If there is anything in particular that you are looking for, please feel free to let me know by PM. I have lots of dxf files to share.

[Switcher]

New DXF File ---> Design 195

.

[rpage]

switcher your a machine! lol, nice stuff!

[rpage]

and that's not a bad thing

[Geoszerda]

you didnt say what you were going to do with it so i dont know if this will work for you or not...

Erik

Thank You Landdesign! I'd like to engrave this drawing.

[Switcher]

switcher your a machine! lol, nice stuff!

rpage,

I have 301 dxf files as of that last post (on my blog).


******************************


Very cool church windows on your blog!

:cheers:


.